Port Mirroring Configuration Screen; Table 28 Multilink Trunk Utilization Screen Fields - Nortel 1000ASE-XD Using Manual

Table 28

Table 28 MultiLink Trunk Utilization screen fields

Field
Trunk
Traffic Type
Unit/Port
Last 5 Minutes
Last 30 Minutes
Last Hour

Port Mirroring Configuration screen

The Port Mirroring Configuration screen allows you to configure a specific switch
port to monitor one specific port. You can specify port-based monitoring, and in a
stack configuration, you can monitor ports that reside on different units within the
stack.
For more information about the port mirroring feature, see
(conversation steering)" on page
Figure 65
describes the MultiLink Trunk Utilization screen fields.
Description
Column header for the read-only fields in this screen. The read-only data displayed in
this column indicates the trunk (1 to 6) that corresponds to the switch ports specified
in the Port field.
Allows you to choose the traffic type to be monitored for percent of bandwidth
utilization (see Range).
Default Value Rx and Tx
Range Rx and Tx, Rx, Tx
Lists the trunk member ports that correspond to the trunk specified in the Trunk
column. The (Unit/) extension to the Port column name only appears when the switch
(unit) is part of a stack configuration. It indicates that the ports in this row are
associated with the specified unit number configured in the Unit field.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 5 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 30 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
This read-only field indicates the percentage of packets (of the type specified in the
Traffic Type field) utilized by the port in the last 60 minutes. This field provides a
running average of network activity and is updated every 15 seconds.
shows an example of a Port Mirroring Configuration screen.
Chapter 3 Using the console interface
39.
Using the BayStack 420 10/100/1000 Switch
139
"Port mirroring