Multilink Trunk Configuration Screen; Table 26 Multilink Trunk Configuration Menu Options - Nortel 1000ASE-XD Using Manual

Table 26

Table 26 MultiLink Trunk Configuration Menu options

Option
MultiLink Trunk
Configuration...
MultiLink Trunk
Utilization...
Return to Switch
Configuration Menu

MultiLink Trunk Configuration screen

The MultiLink Trunk Configuration screen
to six trunks in a standalone switch or stack. In a stack configuration, trunk
members can be distributed between any of the units within the same stack
configuration.
To open the MultiLink Trunk Configuration screen:
describes the MultiLink Trunk Configuration Menu options.
Description
Displays the MultiLink Trunk Configuration screen
allows you to configure up to six MultiLink Trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports together to
form each trunk.
Displays the MultiLink Trunk Utilization screen
screen allows you to monitor the bandwidth utilization of the configured trunks.
Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.
Choose Trunk Configuration (or press t) from the MultiLink Trunk
Configuration Menu screen.
Chapter 3 Using the console interface
(Figure
(Figure 63
(Figure 62) allows you to configure up
Using the BayStack 420 10/100/1000 Switch
135
62). This screen
and Figure 64). This