Figure 12 Default Vlan Settings - Nortel 1000ASE-XD Using Manual

Figure 12 Default VLAN settings

802.1Q Switch
Port 1 Port 2
PVID = 1
DA
SA
Incoming
untagged
Data
packet
CRC
Key
By default:
All ports are assigned PVID = 1
All ports are untagged members of VLAN 1
When you configure VLANs, you configure the switch ports as tagged or
untagged members of specific VLANs (see
In Figure 12, untagged incoming packets are assigned directly to VLAN 2
(PVID = 2). Port 5 is configured as a tagged member of VLAN 2, and port 7
is configured as an untagged member of VLAN 2.
Chapter 2 Network configuration
VLAN 1
Port 3 Port 4 Port 5
CRC
Data
Outgoing
untagged packet
(unchanged)
SA
DA
Figure 13
Using the BayStack 420 10/100/1000 Switch
Port 6 Port 7 Port 8
through Figure 21).
57
BS45010A