Figure 36 Example 1: Correctly Configured Trunk - Nortel 1000ASE-XD Using Manual

The switch can also detect trunk member ports that are physically misconfigured.
For example, in Figure
configured correctly to trunk member ports 7, 9, and 11 of Switch S2. The
Spanning Tree Port Configuration screen for each switch shows the port state field
for each port in the Forwarding state.

Figure 36 Example 1: correctly configured trunk

S1 Port Configuration screen
S2
Chapter 2 Network configuration
36, trunk member ports 2, 4, and 6 of Switch S1 are
S1
T1
S2 Port Configuration screen
Using the BayStack 420 10/100/1000 Switch
83
BayStack
420
BayStack
420
10014EA