Figure 40 Console Interface Main Menu; Table 9 Console Interface Main Menu Options - Nortel 1000ASE-XD Using Manual

Figure 40 Console interface main menu

Table 9

Table 9 Console interface main menu options

Option
IP Configuration/
Setup...
SNMP Configuration...
System
Characteristics...
describes the CI main menu options.
Description
Displays the IP Configuration/Setup screen (see
on page 94). This screen allows you to set or modify IP configuration
parameters.
Displays the SNMP Configuration screen (see
page 99). This screen allows you to set or modify the SNMP read-only
community and read-write community strings, enable or disable the
authentication trap and the link Up/down trap, set the IP address of trap
receivers, and set the trap community strings.
Displays the System Characteristics screen (see
screen" on page 100). This screen allows you to view switch characteristics,
including number of resets, power status, hardware and firmware version, and
MAC address. This screen also contains three user-configurable fields:
sysContact, sysName, and sysLocation. When the switch is part of a stack
configuration, this screen also displays the base unit identification, the number of
units configured in the stack, and the local unit stack number.
Chapter 3 Using the console interface
"IP Configuration/Setup screen"
"SNMP Configuration screen" on
"System Characteristics
Using the BayStack 420 10/100/1000 Switch
91