Camera' Tab - Digisol DG-SC2100 User Manual

3.3.1.1 'Camera' tab

In this tab you can configure all cameras you wish to connect. Up to 16 cameras can
be connected simultaneously:
Below are the detailed descriptions of all the settings:
Item
Channel
Camera Search
Select
Refresh
Name*
Model
IP Address*
DG-SC2100/DG-SC2100W User Manual
Select the channel number you wish to set.
All cameras found on your local network will be displayed in
the 'Camera Search' box.
Select a camera listed in the 'Camera Search' box, and click
'Select' button to automatically fill all parameters of selected
camera in the configuration fields.
Rescan all cameras on your local network. If you didn't see
the camera you expected in 'Camera Search' box, or new
cameras have been introduced to your local network after last
scan.
Input the name of the camera here. Default value is the last 6
bytes of camera's MAC address; you can change the name of
camera as per your convenience.
Displays the model of selected camera, this field can not be
changed.
Input the IP address of camera.
71
Description