Digisol DG-SC2100 User Manual page 40

WPA Pre-Shared Key
WEP Key Length
WEP Key Format
Default Key
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
Click 'Apply' to save settings and make the new settings take effect.
DG-SC2100/DG-SC2100W User Manual
Input the WPA pre-shared key here.
This field is only available when authentication type is
WPA-PSK or WPA2-PSK, and will be grayed out
when other authentication type is selected.
Please select the key length when you use WEP
encryption. Available options are 64-bit and 128-bit.
Selecting '128-Bit' is safer, however, it would make
the network a bit slower.
If the key length is 64-bit, you should input 10 HEX
characters or 5 ASCII characters, like 112233aabb
(HEX) or MYWEP (ASCII).
If the key length is 128-bit, you should input 26 HEX
characters or 13
11223344556677889900abcdef
myweppassword (ASCII).
Select the Key Format of WEP key here. Available
options are 'HEX' and 'ASCII'.
When you select 'HEX' WEP key format, you can only
use numbers (0 to 9), and alphabets a to f as WEP key;
when you select 'ASCII' WEP key format, you can use
all alphanumerical characters, and is case sensitive.
Select the default key set that the IP camera should use
for connecting to the wireless access point when WEP
encryption is used.
Available options are 1 to 4.
Input the 1st set of WEP key here. At least one set of
WEP key is required when WEP encryption is used.
Only 1st WEP key should be used if there is only one
WEP key.
Input the 2nd set of WEP key here.
Input the 3rd set of WEP key here.
Input the 4th set of WEP key here.
40
ASCII characters,
(HEX)
like
or