Digisol DG-SC2100 User Manual page 105

DG-SC2100/DG-SC2100W User Manual
In this page, you can input IP camera's parameters manually:
Camera Name: You can define a name for this IP camera to help you to remember
the location of this IP camera.
IP Address/ DDNS: Here, you can enter the IP Address details of an IP camera or you
can enter the DDNS URL of an IP camera if any.
Port: Enter the HTTP port of an IP camera. Default port is 80.
User Name: Input the user name of IP camera. Default user name is 'admin'
Password: Input the password of IP camera. Default password is '1234'
Click 'Add' to add a new IP camera with parameters listed above.
When an IP camera has been added successfully, it will be listed under Settings tab.
To remove/ delete an IP camera, click the desired model & keep it pressed. It will
prompt you a message as shown below:-
105