Digisol DG-SC2100 User Manual page 68

Moving the mouse cursor over certain sections of the screen provides the names of the
buttons
Below are the detailed descriptions of all buttons:
Item
Video displaying
area
Language
Display layout
Full screen
Scan
PTZ control
Home
Recording
Setup
Playback
DG-SC2100/DG-SC2100W User Manual
The image of all connected cameras will be displayed here.
Select a language from this dropdown menu to change display
language.
Change camera image display layout (Click a layout icon to
change camera display layout). There are 8 kinds of available
display layouts.
Click this button to switch to full screen mode (only display
all camera's image), press 'ESC' key to quit full screen mode.
Click this button and the IP camera surveillance software will
switch displaying the image of all connected camera
automatically. Click this button once to activate scan function
(scan icon will become blue
(scan icon will become white ).
There are 8 directions in PTZ control ring. If the camera you
connect supports PTZ, you can use PTZ control ring to change
the direction that camera points to.
This function is only available for supported cameras.
Click this button to return the camera to 'Home' (default)
position.
This function is only available for supported cameras.
Start video recording.
Software / camera configuration.
Playback a recorded video file.
68
Description
), click again to stop scanning