Digisol DG-SC2100 User Manual page 48

Passive Mode Select 'Enable' to use passive mode to send file or select 'Disable' so
as to not use passive mode to send file.
Most of the FTP servers can work fine in both Passive and Non-
Passive modes. However, if in doubt, the FTP servers administrator
should be able to help.
Click 'Apply' to save settings and make the new settings take effect.
Once configured, click 'Upload a test file' to send a file to the FTP to verify the
functioning of the settings.
DG-SC2100/DG-SC2100W User Manual
48