Dynamic Dns - Digisol DG-SC2100 User Manual

2.2.3 Dynamic DNS

If your ISP does not give you a fixed Internet IP address (i.e. the Internet address
you're using when you access the Internet is not always the same – ask your ISP for
detailed information), you can use this function to help you locate the IP address of
this IP camera when you're away from home or office.
Before you can use this function, you'll need to apply for an account at no-ip.com
(http://www.no-ip.com). Detailed instructions of how to apply a new account can be
found on no-ip.com's website. (Refer
The settings in this menu are described below:
Item
Enable DDNS
Provider
Host Name
User Name
Password
Click 'Apply' to save settings and make the new settings take effect.
DG-SC2100/DG-SC2100W User Manual
section 4
Select 'Enable' to activate Dynamic DNS function of this IP
camera, select 'Disable' to disable it.
Select dynamic DNS service provider here.
Input dynamic DNS host name here.
Input dynamic DNS user name here, must be the same as the
one you applied on no-ip.com.
Input dynamic DNS password here, must be the same as the
one you applied on no-ip.com.
32
to obtain a free no-ip account).
Description