Email Settings - Digisol DG-SC2100 User Manual

2.5.1 Email Settings

These settings are used to send the captured picture via Email:
The settings in this menu are described below:
Item
Recipient Input the recipient's Email address here. If you have more than one
E-Mail Address Email recipient, please add a ";"(semicolon) mark between every
Email address. All characters shouldn't exceed 127 characters.
SMTP Server Input the IP address or host name of the SMTP server (the server that
delivers the Email).
If you don't know, please refer to the SMTP server you're using in
your Email software (like Outlook, Outlook Express etc.), or check
with your network administrator or ISP.
SMTP Port Input the mail server's SMTP port here. Most of the mail servers use
port number 25.
Sender E-Mail Input the Email address of mail sender, this will help in identifying
Address IP camera which captured the mailed image.
NOTE: Some mail servers would reject to deliver the Email from
unknown sender. Hence it's recommended to input an Email address
here.
SSL If SSL encryption is required to connect to the SMTP server, select
'Enable' or SMTP connection may fail; select 'Disable' if your
SMTP server doesn't support SSL encryption. If in doubt, check with
your ISP or mail server's administrator.
SMTP Some SMTP servers require mail senders to be authenticated before
Authentication they can send an Email. In such a case, please select 'Enable', or else
select 'Disable'. If you don't know, please refer to the SMTP server
DG-SC2100/DG-SC2100W User Manual
Description
46