Digisol DG-SC2100 User Manual page 38

Available Networks
SSID
DG-SC2100/DG-SC2100W User Manual
wireless access point, and you have computers with
wired network connection.
Displayed here are all the wireless access points
detected by this IP camera. Please note not all access
points will be displayed at the same time, if the access
point you wish to connect does not appear, you may
have to click 'Refresh' button several times until it
appears.
The description of all the fields are provided below:
Connect: You can select the wireless access point you
wish to connect here.
SSID: The SSID of all the detected wireless access
points will be shown here. Some wireless access points
may hide their SSID, in which case, you have to
identify them by their MAC address.
MAC Address: In case there are many wireless access
points in proximity or some wireless access points hide
their SSID, you can use MAC address to distinguish
them.
Signal: Shows the radio signal strength in percentage.
Channel: Shows the radio channel of the wireless
access point.
Encryption: Shows the encryption type used by the
wireless access point. You must use the same
encryption type if you wish to connect to a certain
wireless access point. If the wireless access point does
not use encryption, 'Disabled' will be displayed here.
Network Type: Shows the network type of a certain
wireless access point (Infrastructure or Adhoc).
Input the SSID of the wireless access point you wish to
connect. It should be less than 32 alphanumerical
characters.
When you select a wireless access point above, it's
SSID will be filled in this field automatically.
However, if the SSID is not displayed, you need to
38