Digisol DG-SC2100 User Manual page 72

Username*
Web Port*
Password
Video Format**
Reset
OK
Cancel
*: It is recommended to use 'Select' button to fill the content of this field.
**: Only available for cameras that support this function.
After you've configured all channels you wish to set, click 'OK' to save the settings,
and if everything's correct, you'll see the camera's image in IP camera surveillance
software's main menu:
DG-SC2100/DG-SC2100W User Manual
Input the user name of camera.
Input the web port of the camera. By default it's '80'.
Input the password of camera. Default value is '1234'. You
should change the password if you have changed the password
of selected camera.
Select the video encoding format of this camera (MJPEG,
H.264 or MPEG4).
Clear all fields in 'Camera Configuration' section.
Save settings in this tab.
Discard all settings in this tab.
72