Log Onto Web Management Interface - Digisol DG-SC2100 User Manual

DG-SC2100/DG-SC2100W User Manual

1.8 Log Onto Web Management Interface

Make sure the IP camera is correctly powered on (Power LED is on), and then launch
Internet Explorer and type the IP address of the IP camera in the address bar of
Internet Explorer. You should be prompted to input the user name and password:
Default user name is 'admin' and password is '1234'. Click 'OK' to continue after
user name and password has been entered.
If you're rejected, maybe the password has been modified previously. This should not
happen if this is a newly-purchased camera. However, if the camera has been used
earlier, the password would have been changed. Please try to obtain the correct user
name / password, or else reset the camera to default settings.
22