Set Up Motion Detection Region - Digisol DG-SC2100 User Manual

DG-SC2100/DG-SC2100W User Manual

2.6.2 Set up Motion Detection Region

If notification is required when motion is detected only in a certain area of captured
image, this function can be used. Any motion outside the motion detection region will
be ignored, reducing the number of unwanted motion detection notifications.
This IP camera supports up to 3 motion detection regions. To setup detection region,
Please use the mouse to drag and resize motion detection regions marked as
'Region1', 'Region2' and 'Region3' (appear as yellow, green and red squares on
image)
Motion detection region settings can be found at the bottom of this page:
51