3-5-1 Image Setting
You can adjust the image parameters in this page.
Here is the description of every setup item:
Item
Brightness /
Contrast /
Saturation /
Sharpness
Default
Mirror
Control the image parameters. Click '-' to decrease value, or
click '+' to increase value. You can also input the value in the
field directly. The maximum value these fields can accept is
255.
Set all above values to default value '128'.
Check 'Vertical' or 'Horizontal' box to flip the image
vertically or horizontally, this will help to correct the
orientation of image when IP camera is hanging bottom-up by
Description
47
DG-SC3800P User Manual