Camera Installation - Digisol DG-SC2100 User Manual

1.5 Camera Installation

Please follow the instructions mentioned below to set up your IP camera.
1. Unpack the product package and check if anything is missing.
2. Insert supplied LAN cable to 'LAN' jack. You can skip this step if wireless network
is to be used.
3. Plug the power adapter to the wall socket, and connect the power connector to the
power jack located at the rear of the IP camera.
4. Mount the IP Camera on the tripod stand and align the tripod stand such that the
camera captures the view of the area to be monitored.
DG-SC2100/DG-SC2100W User Manual
11