Installing The Switch 1600M; Included Parts - HP ProCurve Switch 1600M Installation Manual

Installing the Switch 1600M

The HP Switch 1600M is an easy to install unit. It comes with an accessory kit
that includes the brackets for mounting the switch in a standard 19-inch telco
rack or an equipment cabinet, or on a wall, and with rubber feet that can be
attached so the switch can be securely located on a horizontal surface. The
brackets are designed to allow mounting the switch in a variety of orientations.
This chapter shows you how to install your Switch 1600M.

Included Parts

The Switch 1600M has the following components shipped with it:
HP ProCurve Switch 1600M Installation Guide (J4120-90001), this
manual
HP ProCurve Switch 8000M and 1600M Management and Configura-
tion Guide (5967-2142)
HP TopTools for Hubs & Switches - CD ROM and booklet
Customer Support/Warranty booklet
Accessory kit (5064-2085)
• two mounting brackets
• four 10 mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Console cable
Power cord, one of the following:
Australia/New Zealand
United Kingdom
China
Continental Europe
Denmark
Japan
Switzerland
United States/Canada/Mexico
(8120-6803)
(8120-6801)
(8120-8377)
(8120-6802)
(8120-6806)
(8120-6804)
(8120-6807)
(8120-6805)
2
2-1