Installing The Switch 1600M And 2424M; Included Parts - HP J4093A Installation Manual

Installing the Switch 1600M and 2424M

The HP Switch 1600M and 2424M are easy to install units. They each come
with an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack or an equipment cabinet, or on a wall, and with
rubber feet that can be attached so the switch can be securely located on a
horizontal surface. The brackets are designed to allow mounting the switch
in a variety of orientations.
This chapter shows you how to install your Switch 1600M and 2424M.

Included Parts

The Switch 1600M and 2424M have the following components shipped with
them:
HP ProCurve Switch 1600M and 2424M Installation Guide (5967-6966),
this manual
HP ProCurve Switch Management and Configuration Guide
(5967-2142 for the 1600M, and 5967-6967 for the 2424M)
HP TopTools for Hubs & Switches - CD ROM and booklet
Customer Support/Warranty booklet
Accessory kit (5064-4280)
• two mounting brackets
• four 10 mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Console cable
Power cord, one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
8120-6803
8120-8377
8120-6802
8120-6806
8120-6804
8120-6807
8120-8709
8120-6805
2
2-1