Twisted-Pair Cable For Switch (Mdi-X) To Hub Or Switch (Mdi-X) Network Connection - HP ProCurve Switch 1600M Installation Manual

Twisted-Pair Cable for Switch (MDI-X) to
Hub or Switch (MDI-X) Network Connection
To connect hubs or switches or other MDI-X network devices to these ports,
use a "crossover" cable.
N o t e
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 3 and 6
on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 1 and 2
on connector "B".
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired
in the cable.
.
Connector "A"
Crossover Cable
white/orange
orange/white
white/green
green/white
Cables and Connectors
Twisted-Pair Cable/Connector Pin-Outs
Connector "B"
B-3