Mode Select Button And Indicator Leds - HP ProCurve Switch 1600M Installation Manual

Mode Select Button and Indicator LEDs

To optimize the amount of information that can be displayed for each of the
switch ports without overwhelming you with LEDs, the Switch 1600M uses a
Mode LED for each port. The operation of this LED is controlled by the Mode
Select button, and the current setting is indicated by the Mode indicator LEDs
near the button. Press the button to step from one mode to the next.
Mode Select button
and indicator LEDs
Act Fdx 100
Self
Mode Select
Test
If the Activity (Act) indicator LED is lit, each port Mode LED displays
activity information for the port—it flickers as network traffic is received
and transmitted through the port.
If the Full Duplex (Fdx) indicator LED is lit, the port Mode LEDs light for
those ports that are operating in full duplex.
If the 100 Mbps (100) indicator LED is lit, the port Mode LEDs light for
those ports that are operating at 100 Mbps.
Module
Status
Introducing the HP Switch 1600M
Port Mode LED
Fan
Status
Front of the Switch
9X 10X
1-5