Introducing The Hp Switch 1600M - HP ProCurve Switch 1600M Installation Manual

Introducing the HP Switch 1600M

The HP Switch 1600M is a multiport switch that can be used to build high-
performance switched workgroup networks. This switch is a store-and-
forward device that offers low latency for high-speed networking.
HP ProCurve Switch 1600M (HP J4120A)
Throughout this manual, this switch will be abbreviated as the Switch 1600M.
The Switch 1600M has 16 10/100Base-T RJ-45 ports, and a slot for installing
any of the supported switch modules. At the time of this printing, there are 4:
With this switch you can build a switched network infrastructure by
connecting it to hubs, other switches, or routers, or you can connect
computers, printers, and servers to these switches to provide dedicated
bandwidth to those devices.
This chapter describes your HP Switch 1600M including:
A
Switch 1600
HP J4120A
Power
Fault Console
Self
Reset Clear
Test
HP J4111A Switch 10/100Base-T Module (8 RJ-45 ports)
HP J4112A Switch 100Base-FX Module (4 SC-connector fiber-optic ports)
HP J4113A Switch Gigabit-SX Module (1 SC-connector fiber-optic port)
HP J4118A Switch 10Base-FL Module (4 ST-connector fiber-optic ports)
Front and back of the switch
Features
Switch operation overview
Act Fdx 100
Module Fan
Mode Select Status Status
1X 2X 3X 4X 5X 6X 7X 8X
9X 10X 11X 12X 13X 14X 15X 16X
1
1-1