Fiber-Optic Cables; 10Base-Fl Ports; 100Base-Fx Ports; Gigabit-Sx Ports - HP ProCurve Switch 1600M Installation Manual
Hide thumbs
Also See for ProCurve Switch 1600M:
- Management and configuration manual (690 pages) ,
- Installation and configuration manual (504 pages) ,
- Installation and getting started manual (348 pages)
Table of Contents
Advertisement
Cables and Connectors
Fiber-Optic Cables
Fiber-Optic Cables
10Base-FL Ports
Fiber-optic cables connected to the 10Base-FL Switch Module ports must be
1300 nm wavelength, multimode cable conforming to the ISO/IEC 793-2 type
B1, and ITU-T G.652 standards, and the cables must have ST-type connectors.
100Base-FX Ports
Fiber-optic cables connected to the 100Base-FX Switch Module ports must be
1300 nm wavelength, multimode cable conforming to the ISO/IEC 793-2 type
B1, and ITU-T G.652 standards, and the cables must have SC-type connectors.
Gigabit-SX Ports
Fiber-optic cables connected to the Gigabit-SX Switch Module ports must be
850 nm wavelength, multimode cable that are fitted with SC-type connectors.
B-5
Advertisement
Table of Contents
