Installing The Switch; Included Parts - HP ProCurve 2510G Series Installation And Getting Started Manual

Installing the Switch

The ProCurve Switch 2510G Series devices are easy to install. They come with
an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack, in an equipment cabinet, and with rubber feet that
can be attached so the switch can be securely located on a horizontal surface.
The brackets are designed to allow mounting the switch in a variety of
locations and orientations. This chapter shows how to install the switch.

Included Parts

The Switch 2510G Series devices have the following components shipped with
them:
■
■
■
■
■
ProCurve Switch 2510G Series Installation and Getting Started Guide,
this manual
Read Me First
Console cable (5188-3836)
Customer Support/Warranty booklet
Accessory kit
5069-6535
( )
two mounting brackets
four 8-mm M4 screws to attach the
mounting brackets to the switch
four 5/8-inch number 12-24 screws to attach
the switch to a rack
four rubber feet
2
2-1