Position for use
Raise or lower the headrest while pull-
ing it towards the front of the vehicle.
To remove the headrest
Press tab 1 and 2 simultaneously
remove the headrest.
Note: on the saloon version, first lower
the bench seatback (refer to the infor-
mation on the "Rear seat functions" in
To refit the headrest
Insert the headrest rods into the
sleeves, and lower the headrest to the
Lower the headrest as far as possi-
ble, then press tab 2 and lower it com-
When the headrest is set at the
lowest position (position A) this is
for storage only:. It should not be in
this position when a seat is occupied.
The headrest is a safety
component, check that it is
fitted and in the correct po-