VEHICLE SETTINGS PERSONALISATION MENU
This function, integrated into trip com-
puter and warning system 1, allows
certain vehicle functions to be acti-
vated/deactivated and adjusted.
Accessing the vehicle
With the vehicle stationary, press either
button 2 or 3 several times until the
"settings menu: long press" message
is shown on display 1. Press either but-
ton 2 or 3 for longer than 2 seconds to
enter the menu.
Adjusting the settings
Press one of buttons 2 or 3 to select a
function to change:
a) automatic locking of the doors while
b) unlocking the driver's door only;
c) rear screen wiping in reverse gear;
d) automatic daytime running lights
e) front parking distance control;
f) rear parking distance control;
g) parking distance control volume;
h) instrument panel language.
Once a line has been selected, keep
pressing either button 2 or 3 to change
If you select either "parking distance
control volume" or "language", you will
have to make a further selection (sound
volume of the parking distance control
or instrument panel language). In this
case, make your selection and confirm
it by holding either button 2 or 3, the
value selected is shown by a
front of the line.
To exit the menu, select "exit" or "back"
then confirm by keeping either button 2
or 3 pressed. It may be necessary to
carry out this operation several times.
The vehicle settings personalisation
menu cannot be used when driv-
ing. At speed exceeding 12 mph
(20 km/h), the instrumental panel dis-
play switches automatically back to
trip computer and warning system