TYRE INFLATION KIT
Once the tyre has been correctly in-
flated, remove the kit: slowly unscrew
end piece 6 so to ensure no product es-
Affix the driving recommendation label
to the dashboard where it can easily be
seen by the driver.
Put the kit away.
Start driving immediately, and after
6 miles (10 kilometres) or 10 minutes
driving, stop to check the tyre pressure.
If it is above 1.3 bar, adjust it to the rec-
ommended pressure (refer to the infor-
mation on "Tyre pressures"), otherwise
contact an approved dealer: repair is
Please be aware that a
poorly tightened or miss-
ing valve cap can make the
tyres less airtight and lead
to pressure loss.
Always use valve caps identical to
those fitted originally and tighten
Nothing should be placed
around the driver's feet
as such objects may slide
under the pedals during
sudden braking manoeuvres and
obstruct their use.
Precautions when using the
The kit should not be operated for more
than 15 consecutive minutes.
Following repair with the kit,
do not travel further than
120 miles (200 km). In addi-
tion, reduce your speed and
under no circumstances exceed
48 mph (80 km/h). The sticker, which
you must affix in a prominent posi-
tion on the dashboard, reminds you
Depending on the country or local
legislation, a tyre repaired with
the inflation kit may need to be re-