REAR SCREEN WASH/WIPE
Rear screen wiper
With the ignition on, turn ring A
of stalk 1 to align mark 2 opposite the
symbol, then release it.
To stop the operation, pivot ring A
Wiping frequency varies with vehicle
Activation/deactivation of the rear
Your vehicle is designed to activate the
rear wiping function in reverse gear (if
the windscreen wipers are operating).
You can choose to activate or deacti-
vate the function. To do this, refer to
the information on the "Vehicle set-
tings customisation menu" in Section 1;
"Rear wiping in reverse gear".
: function activated;
: function deactivated.
Rear screen washer/
With the ignition on, push the stalk.
Before any action on the
windscreen (washing the
vehicle, de-icing, cleaning
the windscreen, etc.) return
stalk 1 to the park position.
Risk of injury or damage.
Check the condition of the wiper
blades. You are responsible for their
– they must remain clean: clean
the blades, windscreen and
rear screen regularly with soapy
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.
In all cases, replace them as soon
as they begin to lose efficiency: ap-
proximately once a year.
Before using the rear wiper, check
that no object obstructs the travel of
Do not use the wiper arm to open or
close the tailgate.