Accessing The System In The Security Mode; Changing Passwords - Raritan MCCAT18 User Manual

The Security Feature

Accessing the System in the Security Mode

After the system or the MCCAT unit enters the security mode, a message
"Security Mode Protected"appears on the screen. Do the following to
access the system:
1. Press any key and the prompt message "Password:" appears.
2. Type either the administrator (Admin) or user password and press
User Type
Administrator (Admin)
User1
User2
User3
User4
User5
Video of the currently selected channel appears on the screen if the
password is entered correctly. Now you can activate the OSD or press the
channel button to access any channel in the system.

Changing Passwords

MCCAT provides one administrator (Admin) password and five user
passwords by default. These passwords allow you to access the system
after it enters the security mode. It is strongly recommended to change
the default passwords before turning on the security feature.
1. (Optional) If the OSD is not onscreen, press the hot key twice
2. Press F5 and the prompt message "Admin. Password" appears on the
24
Enter. Unless changed, type one of the default passwords shown
below.
QUICKLY (default: Scroll Lock) to activate it.
screen.
Default Password
(case sensitive)
raritan
111
222
333
444
555