Table of Contents
Advertisement
d. Click the Port field and type the appropriate number of the serial
port. For example, if the MCCAT unit connects to the computer
via COM 1, type 1.
e.
Ensure <Default No Encryption> is selected in the Encryption
Key field.
f.
(Optional) Click Save to save the device information so next time
you donʹt have to specify the same information again.
3. Select the checkbox next to the MCCAT unit.
4. Click Load Hex File . The Open dialog appears.
5. Navigate to where the desired firmware file (*.hex) is located, select it
and click Open.
6. Click Raritan MasterConsole to perform the upgrade.
Note: The "Check Device Information" button is disabled with the
MCCAT unit. Therefore, never click it when the device intended to
upgrade is MCCAT.
Chapter 6: Firmware Upgrade
43
Advertisement
Table of Contents
