Table of Contents
Advertisement
Introduction to the Selection Menu
Field
Meaning
Name
Name of the device or
computer connected to
the channel
Status
Channel status
Switching between Pages
If there are more than one page of channels, use the following keys to
change pages:
•
•
16
Description
If there is any computer or device connected to the channel, the
default name is PC<XXXX>, where <XXXX> indicates the
channel number. For example, the computer connected to
channel number 3 is shown PC0003. The name can be changed.
For more information, see Changing Channel Names (on page
11).
It is always shown +S<XX> and has two meanings:
•
The appearance of this channel status indicates the channel
is active while its absence indicates the channel is inactive.
•
<XX> indicates the scan time setting of the single channel
for "Individual" scan mode and the unit of the scan time is
in seconds.
Press Page Up or Page Down to go to previous or next page.
Press Home or End to go to the first or the last page.
Advertisement
Table of Contents
