Selecting a Channel
Note: The front panel operation becomes invalid if the OSD remains displayed on
the screen. Therefore, make sure the OSD is NOT onscreen when operating with
the front panel buttons.
OSD Operation
1. Press the hot key twice QUICKLY (default: Scroll Lock) to activate
2. The Selection Menu similar to the following image appears, with eight
3. (Optional) Press Page Down or Page Up to switch between pages if
4. Press or to move the yellow highlight bar to the desired channel,
5. Press Enter and the video of the accessed channel appears on the
10
the OSD.
channels shown on one page. Note that the default name PC<XXXX>
(<XXXX> indicates the channel number) appears only when the
MCCAT unit detects that a device is being connected to the channel.
your MCCAT contains more than eight channels and the desired
channel is not on the current page.
or simply press the corresponding "Key" number of that channel to
immediately access it.
screen.