Compatibility with MasterConsole II
3. The rightmost LED on the front panel is lit, indicating the device is
4. Repeat Steps 1 to 3 if more MasterConsole II units are to be
STEP 2: Connect the Second-Tier MasterConsole II Units
1. Attach a PS/2 CIM to a MasterConsole II unit that is programmed as a
2. Connect one end of the Cat5 UTP cable to the RJ45 port of the CIM
3. Connect one end of the power cord to the power jack of the
4. If you want to connect more second‐tier MasterConsole II units to the
5. Power ON the second‐tier devices first. Then power ON the first‐tier
STEP 3: Specify the Type of the Connected Second-Tier
Device in the OSD
You must specify the type of the connected device in the Configuration
Menu. Otherwise, you may not be able to access the second‐tier channels.
For instructions on specifying the type, see STEP 4: Specify the Type of
the Connected Second‐Tier Device in the OSD (on page 36).
Note: The second‐tier MasterConsole II unit is shown "/MCC<XXXX>" in the
OSD, where <XXXX> represents the channel number.
50
now programmed as a second‐tier device.
programmed as the second‐tier devices.
second‐tier device.
being attached to the second‐tier MasterConsole II unit; connect the
other end of the cable to one of the channel ports of the first‐tier
MCCAT unit.
MasterConsole II unit and the other end to the appropriate power
outlet.
first‐tier MCCAT unit, repeat Steps 1 to 3.
MCCAT unit.