Raritan MCCAT18 User Manual page 34

System Configuration
Mode Global, Individual
Skip On, Off
ID Display 01 ~ 99 (seconds)
Hotkey ScrollLock, LftAlt (left Alt),
LftSht (left Shift),
CapsLock, NumLock
Display Position Menu, ID
28
Determines which scan mode is applied once the
AutoScan function is activated. There are two
scan modes: Global and Individual.
•
Global scan mode: The scan time for each
channel is the same.
•
Individual scan mode: The scan time for each
channel varies depending on the settings you
have set for each channel in the Edit Names
and Scan Rate menu.
Toggles the AutoSkip mode on or off.
If it is ON, after you exit the OSD, only active
channels can be accessed.
Determines the length of time for which the
accessed channelʹs number (ID) appears on the
screen when the channel is selected.
Determines which hot key can activate the OSD.
The default is Scroll Lock.
Note that if you have set any hot key in the
Previous Channel Key field, the same key will
not be available in the Hotkey field.
Determines the horizontal/vertical position where
the Menu (OSD menu) and/or the ID (channel
number) are displayed. To change the position,
do the following:
a. Highlight the option of which you want
to change the position.
b. Press Enter and the image of the selected
option (Menu or ID) appears on the
screen.
c. Use arrow keys ( , ,
the Menu or ID image until it reaches the
position you prefer.
d. Press Esc or Enter to save the changes.
, ) to move