Raritan MCCAT18 User Manual page 43

4. The characters or dots (see the figure below), from left to right,
represent channel numbers 1, 2, 3, and so on of the first‐tier unit. If
the first‐tier unit contains 16 channels, you will see 16 characters or 16
dots in the field. Press or
channel where the second‐tier device is connected.
5. Type the appropriate code that corresponds to the type of the
connected second‐tier device. For example, if you connect an
MCCAT18 unit to the channel number 3 of the first‐tier unit, type y in
the third character.
See the following table for all codes representing different types of
devices.
Code Type of device
. computer (or server)
x MCC4
y MCCAT18, MCC8
z MCCAT116, MCC16
Note: For detailed information on other types of MasterConsole products, please
refer to MasterConsole II User Manual on the "User Manuals & Quick Setup
Guides" CD or on Raritanʹs Product Documentation webpage
(http://www.raritan.com/support/productdocumentation).
Default Name of the Second-Tier Device
The following default names of the second‐tier devices appear in the
channel list after assigning the device type. Note that <XX> represents the
number of the channel where the device is connected.
•
/MCC<XX> ‐‐ This device is a MasterConsole II unit.
•
/MCCAT<XX> ‐‐ This device is an MasterConsole CAT (MCCAT)
unit.
Chapter 5: Two-Tier System
to select the character representing the
37