Raritan MCCAT18 User Manual page 41

3. Connect one end of the Cat5 UTP cable to the RJ45 port of the CIM
being attached to the second‐tier MCCAT unit; connect the other end
of the cable to one of the channel ports of the first‐tier MCCAT unit.
4. Connect one end of the power cord to the power jack of the MCCAT
unit and the other end to the appropriate power outlet.
5. If you want to connect more second‐tier MCCAT units to the first‐tier
MCCAT unit, repeat Steps 1 to 4.
6. Power ON the second‐tier devices first. After hearing the beep
sounds of the second‐tier devices, power ON the first‐tier device.
Note: Make sure you follow the above power‐on sequence; otherwise, the first‐tier
device may show incorrect channel status.
Chapter 5: Two-Tier System
35