Table of Contents
Advertisement
SCAN button
Channel buttons
TIER LED
Rear View
The rear side comes with a number of connectors for attaching various
devices or cables, such as the monitor.
No.
Component
Power switch
Power jack
PS/2 mouse port
PS/2 keyboard port Connects to a PS/2 keyboard for both of the computer operation
Toggles AutoScan on/off.
When the AutoScan function is on, the system automatically
cycles through all channels until the function is turned off.
These buttons enable immediate access to the computer
connected to the corresponding channel. In addition, each
channel button can show each channelʹs status through its LED
color change.
•
Off: Either no device is connected to the channel, or the
connected device is NOT powered.
•
Orange: A device, which is powered, is connected to the
channel.
•
Green: The channel is being selected and accessed.
Shows the unitʹs tier status.
•
Off: The MCCAT unit is programmed as the first‐tier device.
This is the factory default.
•
On: The unit is programmed as the second‐tier device. For
details about setting the unit as the second‐tier device, see
Setting Up a Two‐Tier System (on page 33).
Description
Toggles power on/off.
Connects to a power cord.
Connects to a PS/2 mouse for computer operation.
and system management.
Chapter 2: Quick Start
5
Advertisement
Table of Contents
