Encryption & Share; Figure 74: Security Settings (Encryption & Share); Figure 75: Security Settings (Encryption Mode Warning Message) - Raritan Dominion KX II Server KX2-432 User Manual

C 10: S S
HAPTER ECURITY ETTINGS
Encryption & Share
Using the Encryption & Share settings you can specify the type of encryption used, PC and VM
share modes, and the type of reset performed when the Dominion KX II reset button is pressed.
•
Encryption Mode. Select one of the options from the drop-down list. When an encryption
mode is selected, a warning is displayed that if your browser does not support the selected
mode, you will not be able to connected to the Dominion KX II:

Figure 75: Security Settings (Encryption Mode Warning Message)

−
Auto. This is the recommended option; the Dominion KX II auto-negotiates to the
highest level of encryption possible.
−
RC4. Secures user names, passwords and KVM data, including video transmissions using
the RSA RC4 encryption method. This is a 128-bit Secure Sockets Layer (SSL) protocol
which provides a private communications channel between the Dominion KX II unit and
the Remote PC during initial connection authentication.
−
AES-128. The Advanced Encryption Standard (AES) is a National Institute of Standards
and Technology specification for the encryption of electronic data; 128 is the key length.
When AES-128 is specified, please be certain that your browser supports it, otherwise
you will not be able to connect. Please refer to
Encryption for more information.
•
Apply Encryption Mode to KVM and Virtual Media. When checked, this option applies
the selected encryption mode to both KVM and virtual media. After authentication, KVM and
virtual media data is also transferred with 128-bit encryption.
Figure 74: Security Settings (Encryption & Share)
Checking Your Browser for AES
111