The Security Feature
You can prevent unauthorized access to the system and the attached
computers by activating the security feature. When the security feature is
ON, the system will enter the security mode after the mouse and
keyboard activity is not detected for a preset period of time. Users have to
enter a password in order to access the system in the security mode.
Activating the Security Feature
1. (Optional) If the OSD is not onscreen, press the hot key twice
2. Press F5 and the prompt message "Admin. Password" appears on the
3. Type the Admin password (default: raritan) and press Enter. Note
4. Make sure the Security field is already highlighted. If not, press Tab
5. Press or to change the option to On.
6. Press Tab to highlight the Time Out field. This field determines the
7. Type two numeric digits or press or to adjust the time.
8. Press Esc to quit the current menu.
Chapter 4: Advanced Operation and System Configuration
QUICKLY (default: Scroll Lock) to activate it.
screen.
that the password is case sensitive. The Administration Menu appears.
or Shift+Tab to highlight the field.
length of time for which keyboard and mouse activity can remain
inactive before the system enters the security mode.
23