Raritan MCCAT18 User Manual page 33

2. Press or to change the value or switch between options of the
Exception: You need to type a letter or symbol in the Device field to change its
values, instead of using the arrow keys.
The table below explains the functions and available options of each field
in the menu.
Field Available options
Connected No options
Model No options
Name No options
Device x, y, z, . (dot)
Scan
On, Off
Set 05 ~ 99 (seconds)
Chapter 4: Advanced Operation and System Configuration
selected field.
Description
The field CANNOT be configured. It shows the
number and name of the channel being accessed
now.
The field CANNOT be configured. It shows the
model name of the MCCAT unit.
Allows you to assign a name to the current
MCCAT unit for identification. The default is its
model name.
Specifies the type of the device connected to each
channel of current MCCAT unit. If you connect a
second‐tier KVM switch, it is a must to specify the
type of this switch. The characters of this field
represent channel numbers 1, 2, 3, and so on from
left to right. The default value is ʺ.ʺ (dot).
The following lists the characters representing
different types of devices:
. (dot) = computer
x
y
z
Toggles the AutoScan mode on or off.
If it is ON, after you exit the OSD, the system
enters the scan mode (Global or Individual scan
mode) and cycles through all channels.
Determines the length of time for which the
system scans each channel in the "Global"scan
mode.
= MCC4
= MCCAT18, MCC8
= MCCAT116, MCC16
27