Changing Channel Names
2. Press F3 to go to the Edit Names and Scan Rate menu.
3. Press the arrow keys ( , ,
4. Type the new name up to eight characters and each blinking
5. If there are more than one device or computerʹs name to modify,
6. Press Esc to exit the current OSD menu.
7. The message "Save the changes: [Y/N]" appears on the message bar.
The OSD returns to the Selection Menu. Verify if the names have been
changed successfully.
12
desired channel name. The selected character blinks, indicating
where the selection is.
character is replaced. However, a second‐tier device does not allow you
to change its first character "/" so you can only type up to seven
characters for such a device name.
repeat Steps 3 to 4.
Press Y to save the new name(s) or N to abort the name(s).
,
), Tab or Shift+Tab to select the