Cycling Through Channels; Front Panel Operation - Raritan MCCAT18 User Manual

Cycling Through Channels

Instead of manually selecting the desired channel to view its video, you
can activate the AutoScan function to make the MCCAT system
automatically display the video of all channels one after another.
There are two types of AutoScan modes: Global and Individual. The
default AutoScan mode is Global. Their differences are described below:
•
•
For instructions on changing the scan mode and time, see System
Configuration (on page 26) later in this chapter.
You can activate the AutoScan function with one of the following ways:
•
•

Front Panel Operation

1. (Optional) If the OSD remains displayed on the screen, quit it by
2. Press the SCAN button on the front panel. The LED under the button
Starting from the currently selected channel, the system displays the
video of each channel one after another. Each channelʹs number and
name (if available) will pop up temporarily on the screen when accessed.
Chapter 4: Advanced Operation and System Configuration
Global scan mode:
The scan time for each channel is the same and it is based on the
setting configured in the Configuration Menu.
Individual scan mode:
The scan time for each channel can be different and it is based on the
settings configured for each channel in the Edit Names and Scan Rate
menu.
Front panel buttons
OSD
pressing the Esc button.
is lit.
19