Table of Contents
Advertisement
Cycling Through Channels
Turn off AutoScan
Press the SCAN button so the LED light is off. The system will stop at the
last scanned channel.
Cycling Through Active Channels Only
When AutoScan is on, the system cycles through all channels, including
ʹactiveʹ and ʹinactiveʹ ones. To shorten the scanning time, you can have the
system skip inactive channels by activating the AutoSkip function.
Activate the AutoSkip Function:
Press the SKIP button on the front panel. The LED under the button is lit.
Turn off AutoSkip
Press the SKIP button and the LED light is off.
OSD Operation
1. (Optional) If the OSD is not onscreen, press the hot key twice
2. Press F6 to activate the AutoScan function.
3. The OSD disappears, indicating the system enters the AutoScan
Starting from the currently selected channel, the system displays the
video of each channel one after another. Each channelʹs number and
name (if available) will pop up temporarily on the screen when the
channel is accessed.
20
QUICKLY (default: Scroll Lock) to activate it.
mode.
Advertisement
Table of Contents
