Table of Contents
Advertisement
Press Page Down or Page Up until you see the page where the
desired second‐tier channel is available.
Note: A second‐tier channel is always shown with two channel
numbers: the first one is the number of the first‐tier channel where
the second‐tier device connects, and the second one is the number of
the second‐tier channel where the computer connects.
3. Press or to highlight the desired channel among the second‐tier
channels.
4. Press Enter to select the channel.
Now you can control the accessed computer with the keyboard and
mouse attached to the first‐tier MCCAT unit.
Important: If you have made physical changes to channels, such as
disconnection or swapping of connected computers, it is strongly
recommended to refresh the channel status before accessing the
channels through OSD. This is because MCCAT does not
automatically update its channel status when the changes occur. For
instructions on refreshing the channel status, see Refreshing the Channel
Status (on page 22).
Chapter 5: Two-Tier System
39
Advertisement
Table of Contents
