Pre-Ride Inspection - Can-Am DS 250 Operator's Manual

Pre-Ride Inspection

Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problems that you discover to reduce the risk of a breakdown or
crash. See an authorized Can-Am dealer as necessary.
Before using this vehicle, the operator should always perform the following
pre-ride inspection check list.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Fluids
Leaks
Steering
Throttle lever
Parking brake
Tires
Wheels
Radiator
Drive chain and
sprockets
Seat
________
WARNING
INSPECTION TO PERFORM
Check fuel, engine oil and coolant levels
Check for any leaks under vehicle
Check if steering operates freely by completely turning it
from side to side
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Apply parking brake and ensure it operates properly
Check tire pressure and condition
Check wheels for damage
Check cleanliness of the radiator
Inspect sprockets for wear or damages
Check drive chain and slider for proper adjustment and
lubrication
Ensure operator seat is properly installed and latched
SAFETY INFORMATION
RIDING THE VEHICLE
________
✔
39