Can-Am DS 250 Operator's Manual page 42

RIDING THE VEHICLE
ITEMS TO BE
INSPECTED
Cargo
Service and storage
compartments
Chassis and
suspension
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
Indicator lamps
Lights
Engine
_______
40
INSPECTION TO PERFORM
If you transport a cargo, respect the load capacity. Ensure
cargo is properly secured to the racks
If you are pulling a trailer or an other equipment:
– Check hitch and trailer ball condition
– Respect the tongue capacity and towing capacity
– Ensure trailer is properly secured to hitch
Check if service and storage compartments are properly
latched
Check underneath vehicle for any debris on chassis or
suspension, properly clean chassis and suspension
INSPECTION TO PERFORM
Check operation of engine oil/temperature indicator lamp
(during first few seconds of key ON)
Ensure the N (neutral) and R (reverse) indicator lamps
come ON as applicable to transmission lever selection
Check operation and cleanliness of headlights and taillight
Check operation of high and low beam
Check operation of brake light
Ensure fuel valve is selected to the ON position
SAFETY INFORMATION
________
✔
✔