Pre-Ride Inspection; Pre-Ride Inspection Check List - Can-Am OUTLANDER 6x6 2021 Series Operator's Manual

PRE-RIDE INSPECTION

Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash. See an authorized Can-Am dealer as necessary.
Before using this vehicle, the operator should always perform the following

pre-ride inspection check list.

Correct any problem found before riding the vehicle. See an authorized
Can-Am dealer if necessary.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Engine oil
Coolant
Leaks
Throttle lever
Parking brake
Tires
Wheels
Radiator
Drive shaft boots
Seat
_______
42
WARNING
INSPECTION TO PERFORM
Check engine oil level.
Check coolant level.
Check for any leaks under vehicle
Activate throttle lever several times to ensure it operates
freely. It must return to idle position when released
Apply parking brake and check if it operates properly
Check tire pressure and condition, refer to
SPECIFICATIONS
Check wheels for damage and for abnormal play. Check
that lug nuts are tightened. Refer to
MAINTENANCE PROCEDURES
in
Check cleanliness of the radiator
Check drive shaft boots and protectors condition
Check if operator seat is in place and properly latched
Check if passenger seat is in place and properly latched
(2-UP Models)
Check the passenger backrest and grab handles condition
(2-UP Models)
SAFETY INFORMATION
and adjust according to load.
for torque specification.
WHEELS AND TIRES
________
✔