Frame - Can-Am DS 250 Operator's Manual

MAINTENANCE PROCEDURES
vmr2006-085-004
TYPICAL — LH REAR BRAKE FLUID
RESERVOIR
Rear Brake Fluid Reservoir
With vehicle on a level surface, brake
fluid should be between MIN. and
MAX. level marks.
vmo2006-014-032
UNDERNEATH RH REAR FENDER
Brake Fluid Replacement
WARNING
Brake fluid replacement should
be performed by an authorized
Can-Am dealer.
Brake Inspection
The braking system is a hydraulic type
and no adjustment is required.
Check the following to keep the brakes
in a good operating condition:
– Brake fluid level
– Brake system for fluid leaks
______________
104
– Brake cleanliness
– Brake for spongy feel
– Brake discs for excessive wear and
surface condition
– Brake pads for wear, damage or
looseness.
SERVICE LIMITS
BRAKE PAD
THICKNESS
BRAKE DISC
THICKNESS
MAXIMUM
DISC WARPAGE
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.
WARNING
Brake system maintenance and re-
pairs should be performed by an
authorized Can-Am dealer.

Frame

Frame Fasteners
Check fastener condition and tight-
ness on the vehicle. Retighten as re-
quired.
2 mm (.08 in)
2 mm (.08 in)
0.15 mm (.006 in)