Pre-Ride Inspection - Can-Am DS 450 EFI X mx Operator's Manual

Table of Contents

Advertisement

Pre-Ride Inspection

Perform a pre-ride inspection before each ride to detect potential problems
during operation. The pre-ride inspection can help you monitor wear and
deterioration before they become a problem. Correct any problems that
you discover to reduce the risk of a breakdown or crash. See an authorized
Can-Am dealer if necessary.
Before using this vehicle, the operator should always:
– Remove the vehicle lock.
– Apply parking brake and check if it operates properly.
– Check tire pressure and condition.
– Check wheels and bearings for wear and damage.
– Check location of controls and ensure they work properly.
– Verify if steering operates freely.
– Activate throttle control lever several times to ensure it operates freely. It must
return to idle position when released.
– Activate the brake levers and brake pedal to make sure the brakes fully apply.
Levers and pedal must fully return when released.
– Ensure front brake lever position is adjusted to suit drivers hand.
– Check all brake line fittings for tightness and against leaks.
– With parking brake correctly applied, activate the clutch lever. It must fully re-
turn when released.
– Inspect skid plate condition, replace if damaged.
– Check clutch for proper adjustment.
– Check drive chain for adjustment and lubrication.
– Check sprockets for wear and damages.
– Check tightening of rear axle fasteners.
– Check swing arm, if any lateral play is detected DO NOT USE THE VEHICLE.
– Check fuel, oil and coolant levels.
– Clean air filter.
– Check for oil leaks on the engine, oil tank and transmission.
– Clean headlights, turn signal lights and taillight.
– Ensure seat is properly latched. If not, remove seat and check latch mechanism
and pin for wear. See an authorized Can-Am dealer for parts replacement if dam-
aged.
– If you transport cargo, respect load capacity. Ensure cargo is properly secured
to the vehicle.
– Look and feel for loose parts while engine is off. Check fasteners.
– Ensure the path of travel is free of persons and obstacles.
________
WARNING
SAFETY INFORMATION
RIDING THE VEHICLE
________
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents